|
251452
Single-end Network Cable Tester
|
|
¡¡Automatic
scan mode,it tests the order and the orientation of modularization
cables continuity,such as 10/100-BASE-£¨UTP-STP£©£¬ATBT 258A£¬TIA568A/B£¬TOkenRing,and
USOC4/6/8.You can test the connectedness and the veracity of cables
easily and quickly no matter when setting by useing the accessory
remote terminal.
|
|
 |
|
Technical
Guideline: |
| TEST
CABLE: |
RJ45,UTP/STP/FTP |
| POWER
SUPPLY: |
DC
9V reduplicated battery |
| ELECTRICITY-CONSUMING: |
25MA |
| BULK: |
10.5*10.5*2.6
mm |
| WEIGHT: |
200G |
| Test
by cables of the Same BNC Axes: |
| 1.¡¡Put
one end of the cable into both main tester and BNC socket,and put
the other into the remote tester. |
| 2.¡¡Switch
on the power,which works if the light is on. |
| 3.¡¡BNC
light will not be on when the cable os connected.Any flash of the
light means an improper cable is connected. |
| 4.¡¡Press
the button on the left of the main tester.If the light is green,the
cable works;if not(means red or any other color of light),the cable
is out of work. |
| Test
by Twin-twisted Cables: |
| 1.¡¡Put
one end of the cabke into the main tester. |
| 2.¡¡Switch
on the power,which works if the light flashed. |
| 3.¡¡Once
switched on,LEDS of the remote tester will scan the cable accordingly.If
the cables are good,the corresponding LEDS will turn green sequently.If
the cables are out of work,the LEDS will first turn green then red
or others,or the LEDS will not be on or be on disorderly. |
| 4.¡¡If
the cables are shielded,shielding is tested when GND is turned on.If
shielding is normal,the corresponding LEDS and GND will turn green.IF
not,the LEDS will first become green then red or will not be on
at all. |
|
| Notice: |
| ¡¡¡¡1¡¡Please
confirm a 9V alkalescent battery has been placed in the box. |
| ¡¡¡¡2.¡¡If
you don't test the shield doubl,please keep the GND switch closing.
|
|
 |
